Bay Networks 5390 Скачать руководство пользователя страница 645 | Manualshive

Страница: 645 / 888

Bay Networks 5390 Скачать руководство пользователя страница 645

893-741-B

C2-39

Configuration Parameters

mop_password

This Model 5390 parameter contains the MOP maintenance password. In this 8-byte password, each
byte consists of two hexadecimal digits. The string size ranges from 0 to 16 characters. For security
reasons, the Model 5390 server displays values as “<set>” or “<unset>.” The default is “<unset>.”

motd_file

This Model 5390 parameter defines the file name for the message-of-the-day file maintained on the
load host. The string size ranges from 0 to 16 characters. The default file name is motd; the file resides

rlogin

Allows a port to communicates via the rlogin
command.Use this option in conjunction with the
asynchronous port parameter dedicated_arguments.

slave

Allows port access through the port server. This mode
provides Model 5390 login lines for hosts that have no
Ethernet interface and/or that require access to modems
and serial line printers attached to the Model 5390 server.
It does not provide access to the CLI.

slip

Allows a port to perform as a network interface using
SLIP. IP packets are encapsulated by SLIP.

telnet

Allows a port to communicate via the telnet command.Use
this option in conjunction with the asynchronous port
parameter dedicated_arguments.

tn3270

Allows a port to communicate via the tn3270 command.
Use this option in conjunction with the asynchronous port
parameter dedicated_arguments.

unused

The port has no connection; the Model 5390 server ignores it.

NOTE:

You should mark a port as unused if it is not connected to

a device.

Table C2-10. Valid Options for the mode Parameter (continued)

Option

Description

«
...
643
644
645
646
647
...
»

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов