manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 209

893-741-B

A9-23

Internetwork Packet Exchange (IPX) Protocol

Configuring ipx-mode Ports and Modems

To configure ports 4 and 11 in Figure A9-4 as ipx ports:

1

Set the mode to ipx for these ports:

annex: su
Password:
annex#: admin
Annex administration Remote Annex R10.1, 24 ports
annex# port 4,11
admin: set port mode ipx

2

To register users with the who database when they dial into the ports, set the type 
parameter to dial_in for each port.

3

Use the defaults for the data_bits (8), stop_bits (1), and parity (none) parameters. 

4

Set the speed parameter to the highest rate supported by the modem attached to each 
port. Do not set speed to autobaud.

5

Set EIA/hardware flow control (RTS/CTS) by setting the control_lines parameter to both, 
and setting the input_flow_control and output_flow_control parameters to eia. 

The Model 5390 server asserts RTS when it is ready to receive data and checks the CTS input 
before transmitting data.

6

For each port, set the type_of_modem parameter to the type of modem attached to the 
port. 

If you do not know the name of your modem type, do as follows:

•

Set type_of_modem to an arbitrary value.

•

Issue the reset annex modem command.

•

Issue the Model 5390 superuser modem -l command. This displays a list of Model 5390 
modem types, from which you can pick the one that matches your modem.

•

Set type_of_modem to the modem type you selected from the list.

7

To configure security for the port, see 

Security for ipx, auto_detect, and auto_adapt 

Ports

 on page A15-31.

NOTE: 

You do not need to set type of modem for Model 5390 servers 

that have internal modems.

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды