manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 426

A15-6

893-741-B

Using Model 5390 Security

•

acp_keys (encryption key information).

•

acp_logfile (security audit trails).

•

acp_dialup (user names and IP addresses for dial-up connections).

•

acp_userinfo (per user port configuration information).

ACP security provides:

•

Validation for host connections.

•

Encryption key protection.

•

Validation for access to dial-up address connections.

•

User profiles for verification.

•

ARA, zone, and logging security for AppleTalk users.

•

Dial-back security.

•

PPP security via CHAP and PAP.

•

Kerberos authentication.

•

SecurID authentication.

•

SafeWord security.

•

Validation for access to the Model 5390 FTP daemon.

•

Connection security.

•

Security event logging.

The following subsections describe the basic ACP actions when the enable_security parameter is 
set to Y. 

Virtual CLI Security 

You can set up security for virtual CLI (VCLI) connections in which users must provide a valid user 
name and password before they are granted access to a virtual CLI: 

NOTE: 

The contents of these files should match on all security servers.

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды