manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 744

C3-68

893-741-B

Using the CLI Commands

both

Specifies both XON/XOFF and CTS/RTS flow control. Both 
flow controls are independent. Data flows out of the port only 
if CTS is high and the last received XON/XOFF character was 
an XON. Receiving XOFF or dropping CTS stops output flow 
from the Model 5390 server to the device.

bell

Has the same effect as setting the parameter to none.

olower
–olower

Controls case conversion for characters sent from the 
Model 5390 server to the terminal. Setting olower converts 
lowercase characters to uppercase. The default, –olower, does 
not change case.

ostartc 
character

Sets the restart output character. The default is 

CTRL-Q

.

ostopc 
character

Sets the stop output character. The default is 

CTRL-S

.

parity 
argument

Type of parity checked on input and generated on output. 
Possible values are: none, even, or odd. The default is none.

prompt code

Changes the CLI prompt. The prompt is specified as 
alphanumeric characters and embedded formatting codes that 
are expanded when the prompt is displayed. The formatting 
codes consist of a percent character (%) followed by a single 
lower case character. The default is %a%c (annex:). The 
formatting codes are:

%a

The string annex.

%c

A colon followed by a space.

%d

The current date and time in standard UNIX format, such as 
Mon Mar 14 13:59:42 1988.

%i

The Model 5390 IP address.

%j

A new line character; skip to the beginning of the next line.

%l

The location defined for the port or the string port nn.

%n

The Model 5390 name or IP address.

Table C3-28. Setting Parameters Using the stty Command (continued)

Parameter

Description

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды