Technical data • Complete system
Chapter 2
Technical data
Panel PC 800 User's Manual V1.30
45
2.6.4 Ethernet 1 interface (ETH1)
This Ethernet controller is integrated in the CPU board and connected to external devices via the system unit.
Ethernet 1 interface (ETH1
1)
)
Controller
Realtek RTL8111B/C
2)
Cabling
S/STP (Cat 5e)
Transfer rate
10/100/1000 Mbit/s
3)
Cable length
Max. 100 m (min. Cat 5e)
Speed LED
On
Off
Green
100 Mbit/s
10 Mbit/s
4)
Orange
1000 Mbit/s
-
Link LED
On
Off
Orange
Link (Ethernet network
connection available)
Activity (blinking)
(data transfer in progress)
Female RJ45 connector
1
Speed LED
Link LED
Table 17: Ethernet interface (ETH1)
1)
The interfaces, etc. available on the device or module have been numbered as such for easy identification. This numbering may differ from that used by
the particular operating system.
2)
The Realtek 8111B is integrated in CPU boards 5PC800.B945-00, -01, -02, -03 and -04.
The Realtek 8111C is integrated in CPU boards 5PC800.B945-05 and 5PC800.B945-10, -11, -12, -13 and -14.
3)
Switching takes place automatically.
4)
The 10 Mbit/s transfer speed / connection only exists if the Link LED is also lit at the same time.
Driver support
A special driver is required in order to operate the Realtek RTL8111B/C Ethernet controller. Drivers for approved
operating systems are available in the Downloads section of the B&R website (
Information:
Required drivers can only be downloaded from the B&R website, not from manufacturer websites.
Dieser Ethernet-Controller ist im Basisboard integriert und wird über die Systemeinheit nach außen geführt.
1)
Controller
Intel 82574
Cabling
S/STP (Cat 5e)
Transfer rate
10/100/1000 Mbit/s
2)
Cable length
Max. 100 m (min. Cat 5e)
Speed LED
On
Off
Green
100 Mbit/s
10 Mbit/s
3)
Orange
1000 Mbit/s
-
Link LED
On
Off
Orange
Link (Ethernet network
connection available)
Activity (blinking)
(data transfer in progress)
RJ45-Buchse, female
1
Speed LED
Link LED
Table 18: Ethernet-Schnittstelle (ETH2)
1)
The interfaces, etc. available on the device or module have been numbered as such for easy identification. This numbering may differ from that used by
the particular operating system.
2)
Switching takes place automatically.
3)
The 10 Mbit/s transfer speed / connection only exists if the Link LED is also lit at the same time.
Driver support
A special driver is required in order to operate the Intel 82574 Ethernet controller. Drivers for approved operating
systems are available in the Downloads section of the B&R website (
Information:
Required drivers can only be downloaded from the B&R website, not from manufacturer websites.
The PPC800 features a USB 2.0 (Universal Serial Bus) host controller with multiple USB ports, 5 of which are
accessible externally for the user.