Software • Upgrade information
Chapter 4 Software
Panel PC 800 User's Manual V1.30
227
Information:
The version can only be displayed when an Automation Panel with an AP Link SDL transmitter
(5AC801.SDL0-00) is connected.
Advanced
Panel control
Panel 0-14: Connected
to Automation Panel
Link or monitor/panel
interface
Brightness: [100%]
Panel 15: Connected to
Panel PC Link.
Note: DVI and PPC Link
will not show valid
values. On PPC Link
only the brightness
option will work.
Select screen
Select item
+- Change option
F1 General help
F10 Save and exit
ESC Exit
Select panel number [0]
Version: V1.04
Temperature: 41°C / 105°F
Fan speed: 00 rpm
Keys/LEDs: 128/128
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.
Firmware for the
SDLR controller
Figure 126: Firmware version of the AP Link SDL transmitter
2.1.2 Procedure with MS-DOS
1. Download the .zip file from the B&R website (
).
2. Create bootable media.
Information:
In MS-DOS, Win95 and Win98, a blank HD disk can be made bootable by typing "sys a:" or "format a: /
s" on the command line.
Information about creating a bootable diskette in Windows XP can be found on page 231.
Information on creating a USB flash drive for a B&R upgrade can be found on page 233.
Information on creating a CompactFlash card for a B&R upgrade can be found on page 234.
3. Copy the contents of the .zip file to the bootable media. If the B&R upgrade was already added when creating
the bootable media with the B&R Embedded OS Installer, then this step is not necessary.
4. Connect the bootable media to the B&R device and reboot.
5. The following boot menu will be shown after startup:
1. Upgrade AMI BIOS for B945
2. Exit
Item 1:
BIOS is automatically upgraded (default after 5 seconds).
Item 2:
Returns to the shell (MS-DOS)