Maintenance and service • Installing and replacing fan kits
348
Panel PC 800 User's Manual V1.30
7 Installing and replacing fan kits
Information:
The following section illustrates a characteristic example of a PPC800 model without expansion. The
only difference in this procedure compared to models with an expansion is the number of combi-Torx
screws to loosen.
7.1 Procedure
1. Loosen the indicated combi-Torx screws (T10) and remove the fan kit cover.
Figure 203: Removing the fan kit cover
2. Insert the fan kit frame and press down until it is fully fastened into the terminal.
Figure 204: Inserting the fan kit
3. Place the dust filter in the fan kit cover and secure it with the filter clasp.
Fan kit cover
Filter clasp
Dust filter
Figure 205: Securing the dust filter with the filter clasp
4. Place the fan kit cover in the housing and fasten using the Torx screws removed earlier.