Software • BIOS options
218
Panel PC 800 User's Manual V1.30
1.11 BIOS default settings
The various positions of the CMOS profile hex switch can be used to load predefined BIOS profile settings.
Information:
The factory default switch position represents the optimal BIOS default values for this system and
should therefore not be changed.
If the "Load setup defaults" function is selected in the main BIOS Setup screen, or if "Exit" is selected (or <F9> is
pressed) in the individual setup screens, the following BIOS settings are the optimized values that will be used.
Profile number
Optimized for
Switch position
Note
Profile 0
Reserved
0
Profile 1
System unit 5PC810.SX01-00 / 5PC810.SX02-00 /
5PC810.SX03-00
1
Profile 2
System unit 5PC810.SX05-00
2
The default settings for this profile can be found in the
APC810 user's manual. This can be downloaded at no
cost from the B&R website.
Profile 3
System unit 5PC820.SX01-00 / 5PC820.SX01-01
3
The default settings for this profile can be found in the
APC820 user's manual. This can be downloaded at no
cost from the B&R website.
Profile 4
Reserved
4
Profile 5
System unit 5PC820.1505-00 / 5PC820.1906-00
5
The default settings for this profile can be found in the
PPC800 user's manual. This can be downloaded at no
cost from the B&R website.
Table 172: Profile overview
The following pages provide an overview of the BIOS default settings for the different CMOS profile switch positions.
Settings highlighted in yellow are variations from the BIOS default profile (=profile 0).
1.11.1 Main
Setting/Option
Profile 0
Profile 5
My setting
System time
-
-
System date
-
-
BIOS ID
-
-
Processor
-
-
CPU frequency
-
-
System memory
-
-
Product revision
-
-
Serial number
-
-
BC firmware rev.
-
-
-
-
Boot counter
-
-
Running time
-
-
Table 173: 945GME Main - Overview of profile settings
1.11.2 Advanced
1.11.2.1 ACPI configuration
Setting/Option
Profile 0
Profile 5
My setting
ACPI aware O/S
Yes
Yes
ACPI version features
ACPI v2.0
ACPI v2.0
ACPI APIC support
Enabled
Enabled
Suspend mode
S1 (POS)
S1 (POS)
USB device wakeup from S3/S4
Disabled
Disabled
Active cooling trip point
Disabled
Disabled
Passive cooling trip point
Disabled
Disabled
Critical trip point
105°C
105°C
Table 174: 945GME Advanced - ACPI configuration - Overview of profile settings
1.11.2.2 PCI configuration
Setting/Option
Profile 0
Profile 5
My setting
Plug & Play O/S
No
Yes
PCI latency timer
64
64
Allocate IRQ to PCI VGA
Yes
Yes
Allocate IRQ to SMBUS HC
Yes
Yes
Allocate IRQ to PCIEX2
Yes
Yes
PCI IRQ resource exclusion
Table 175: 945GME Advanced - PCI configuration - Overview of profile settings