Software • BIOS options
Chapter 4 Software
Panel PC 800 User's Manual V1.30
205
BIOS setting
Function
Configuration options
Effect
USB mass storage reset
delay
Option for configuring the time that POST waits
for USB memory storage devices after the device
start command is issued
Information:
The message "No USB mass storage
device detected" is displayed if a USB
memory device has not been installed.
10 sec, 20 sec, 30 sec, 40 sec Sets the value manually
Disabled
Disables this function. Doesn't add a boot delay.
Special delay for USB
HDDs
Option for setting a boot delay prior to counting
the number of USB 2.0 devices in order to allow
more time for USB devices that generally take
longer to boot (e.g. USB hard disks)
Information:
This option should only be used if ab-
solutely necessary; otherwise, it would
unnecessarily extend the boot proce-
dure by the configured time.
1 sec, 2 sec, 3 sec, 4
sec, 5 sec, 7 sec, 10 sec
Adds a boot delay of 1, 2, 3, 4, 5, 7 or 10 sec-
onds
Table 158: 945GME Advanced - USB configuration - Configuration options
1.4.10 Keyboard/Mouse configuration
Advanced
Keyboard/Mouse Configuration
Select Power-on state
for Numlock.
Typematic Rate [Fast]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Bootup Num-Lock [On]
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.
Figure 111: 945GME Advanced Keyboard/Mouse Configuration
BIOS setting
Function
Configuration options
Effect
Off
Only enables the cursor (movement) functions
of the numeric keypad
Bootup Num-lock
Defines the state of the NumLock key on the nu-
meric keypad when booting
On
Enables the numeric keypad
Slow
Slow key repeat
Typematic rate
Configures the key repeat function
Fast
Fast key repeat
Table 159: 945GME Advanced - Keyboard/Mouse configuration - Configuration options