Technical data • Individual components
Chapter 2
Technical data
Panel PC 800 User's Manual V1.30
137
3.9.23 5ACPCI.RAIC-06
3.9.23.1 General information
This SATA RAID controller supports RAID level 0 and 1 and can be inserted in a PCI slot. The 500 GB hard disks
that are used are specified for 24-hour operation (24x7).
•
SATA RAID controller
•
RAID level 0 (striped) and 1 (mirrored)
•
2x 500 GB SATA hard disks (suitable for 24-hour operation)
•
Only requires 1 PCI slot
•
Transfer rates up to 150 MB/s
Primary hard disk (HDD 0)
Secondary hard disk (HDD 1)
HDD 0
HDD 1
SATA
RAID
Access LED (yellow) for primary (HDD 0)
and secondary hard disk (HDD 1)
Figure 59: PCI SATA RAID controller
Information:
The PCI SATA RAID controller cannot be used in place of a universal power supply (UPS). If the oper-
ating system is not shut down properly, then this will be detected as an error state (with RAID 1 sets)
at the next system startup and a complete rebuild is performed. If 500 GB of memory are used, this
generally takes approximately 500 minutes (configurable) to complete.
3.9.23.2 Order data
Model number
Short description
Figure
Drives
5ACPCI.RAIC-06
PCI RAID system SATA 2x 500 GB; note: please see the manual
for information about using this hard disk
Optional accessories
Drives
5MMHDD.0500-00
500 GB SATA hard disk; replacement for 5AC801.HDDI-04,
5AC901.CHDD-01 and 5ACPCI.RAIC-06; note: please see the
manual for information about using this hard disk
Table 108: 5ACPCI.RAIC-06 - Order data