Maintenance and service • Installing the UPS module
350
Panel PC 800 User's Manual V1.30
8 Installing the UPS module
This module is installed using the materials included in delivery.
Connection cables
Mounting bracket
Spacer bolt (14 mm)
Spacer bolt (16 mm)
Torx screws (T10)
Spacer sleeve (2 mm)
UPS insulation
Figure 206: 5AC600.UPSI-00 Add-on UPS module - Installation materials
8.1 Installation guidelines
1. Remove the side cover (see "Installing the side cover" on page 358).
2. Remove the UPS module cover by removing the 2 marked Torx screws (T10).
Figure 207: Removing the UPS module cover
3. Attach the UPS isolation to the bottom/rear of the UPS module and install both using 2 Torx screws (T10) on
the housing and 1 Torx screw (T10) on the mainboard (spacer bolt). Use the previously removed Torx screws
and the Torx screws from the installation material.
Figure 208: Installing the UPS module