Maintenance and service • Replacing a PCI SATA RAID hard disk in a RAID 1 set
360
Panel PC 800 User's Manual V1.30
1
2
Figure 225: Replacing the hard disk
8. Re-secure the hard disk using the 4 fastening screws (M3x5) used earlier.
9. Reassemble the device in the reverse order.
10.An error message is output by the RAID BIOS after starting the system: "RAID1 set is in Rebuild status. The
rebuild will continue after boot sequence is complete".
11.A rebuild can be performed immediately in SATA RAID BIOS or once the PC has booted - see "Rebuild