Appendix A • Mounting compatibility
Appendix A
Panel PC 800 User's Manual V1.30
371
6.2.3 10.4" devices
323 x 260
10
10
8.5
8.5
Outer contour of device
Cutout for device
303 x 243 ±0.5
PP100/200/300/400
AP900/PPC700
PP100/200/300/400
AP900
PP500
PP500
Figure 233: Mounting compatibility - 10.4" device - Horizontal1
10.4" Power Panel 500 devices and Power Panel 100/200/300/400 devices are 100% mounting compatible in the
Horizontal1 format.
Outer contour of device
Cutout for PP100/200/300/400 device
PP100/200/300/400
AP900/PPC700
13 PP100/200/300/400
8.5 AP900, PPC700,
PP500
Cutout for AP900/PPC700 device
4.
5
423 x 288
10
10
8.5
402 x 271 0.5
±
402 x 266.5 0.5
±
403 x 271 0.5
±
PP500
Cutout for PP500 device
Figure 234: Mounting compatibility - 10.4" device - Horizontal2
10.4" Power Panel 500, Automation Panel 900 and Panel PC 700 devices are not 100% mounting compatible with
Power Panel 100/200/300/400 devices in the Horizontal2 format. The Power Panel 500, Automation Panel 900
and Panel PC 700 devices require a cutout that is 4.5 mm higher (bottom edge).
The larger cutout can be used for all devices under certain conditions:
•
When mounting, make sure that the PP100/200/300/400 devices are placed and mounted as close to the
center of the cutout as possible. Failure to do so can prevent the retaining clips from holding firmly, which
means that a firm seal is no longer guaranteed with the gasket (IP65).