Autodesk AUTOSKETCH 8, Руководство пользователя

Страница: 181 / 400

Inserting Symbols in Lines, Polylines, and Polygons
|
171
From the Content Librarian, you can insert symbols automatically, instead of
choosing Symbol, Insert on the Draw menu. This feature is available through
the Symbol page tab of the Content Explorer.
If you delete an inserted symbol, the insertion gap remains. To restore a line,
either draw a connecting line between the two endpoints of the remaining
line, or click Undo on the Edit menu immediately after inserting the symbol.
To insert a symbol in a line or polyline
1 Click the Symbol page tab on the Content Librarian.
2 Click the Insert Symbol button at the bottom of the Content Librarian.
3 Click and drag the symbol into the drawing.
4 (optional) Enter a custom opening width in the Opening Width text box
on the edit bar and press ENTER. The default setting uses the width of the
symbol extent.
5 Click a point on a line, polyline, or polygon for the basepoint of the
symbol.
6 Click a second point to establish the direction AutoSketch draws the
symbol in relation to the first point entered.
To insert a symbol at a specific point along a line or polyline
1 Click the Symbol page tab on the Content Librarian.
2 Click the Insert Symbol button at the bottom of the Content Librarian.
3 Click and drag the symbol into the drawing.