manualshive.com logo in svg

Autodesk 057B1-41A111-1001 - AutoCAD LT 2010, Руководство пользователя

Поделиться
Скачать
Autodesk 057B1-41A111-1001 - AutoCAD LT 2010 Скачать руководство пользователя страница 439

Dimension Value 

Dimension value that is displayed is the same value before

the inspection dimension is added. The dimension value can contain
tolerances, text (both prefix and suffix), and the measured value. The
dimension value is located in the center section of the inspection dimension.

Inspection Rate 

Text used to communicate the frequency that the dimension

value should be inspected, expressed as a percentage. The rate is located in
the rightmost section of the inspection dimension.

You can add inspection dimensions to any type of dimension. The current
values of an inspection dimension are displayed on the Properties Inspector,
under Misc. The values include the properties that are used to control the look
of the frame, and the text for both the label and rate values.

Break a Dimension Line

With dimension breaks, you can keep the dimension, extension, or leader
lines from appearing as if they are a part of the design.

Dimension breaks can be added to a dimension or a multileader automatically
or manually. The method that you choose to place dimension breaks depends
on the number of objects that intersect a dimension or multileader.

You can add dimension breaks to the following dimension and leader objects:

■

Linear dimensions, including aligned and rotated

■

Angular dimensions, including 2- and 3-point

■

Radial dimensions, including radius, diameter, and jogged

■

Arc length dimensions

Dimensions and Tolerances | 419

Содержание 057B1-41A111-1001 - AutoCAD LT 2010































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды