Autodesk 057B1-41A111-1001 - AutoCAD LT 2010, Руководство пользователя

Страница: 261 / 574

When you chamfer an entire polyline, only the segments that are long enough
to accommodate the chamfer distance are chamfered. The polyline in the
following illustration has some segments too short to be chamfered.
Break and Join Objects
You can break an object into two objects with or without a gap between them.
You can also join objects to create single object or multiple objects.
Break Objects
Use BREAK to create a gap in an object, resulting in two objects with a gap
between them. BREAK is often used to create space for block or text.
To break an object without creating a gap, specify both break points at the
same location.
You can create breaks in most geometric objects except blocks, dimensions,
multilines, and regions. As an alternative, use EXPLODE on these types of
objects, and create breaks in the dissociated geometry.
Join Objects
Use JOIN to combine lines, arcs, elliptical arcs, polylines, 3D polylines, and
splines by their endpoints into a single object.
Select and Modify Objects | 241