Autodesk 057B1-41A111-1001 - AutoCAD LT 2010, Руководство пользователя

Страница: 157 / 574

Enter Cartesian Coordinates
To enter absolute Cartesian coordinates (2D)
■ At a prompt for a point, enter coordinates in the tooltip using the following
format:
#x,y
If dynamic input is turned off, enter coordinates on the command line
using the following format:
x,y
To enter relative Cartesian coordinates (2D)
■ At a prompt for a point, enter coordinates using the following format:
@x,y
Enter Polar Coordinates
You can use absolute or relative polar coordinates (distance and angle) to
locate points when creating objects.
To use polar coordinates to specify a point, enter a distance and an angle
separated by an angle bracket (<).
By default, angles increase in the counterclockwise direction and decrease in
the clockwise direction. To specify a clockwise direction, enter a negative value
for the angle. For example, entering 1<315 locates the same point as entering
Use Precision Tools | 137