10 Defining General Settings
C76IB003EN-E
47
To set mandatory data fields
You can set the sample name and user-defined data fields as mandatory.
1. Tap <Menu> and select
"Setup > Measuring System Settings > Sample
List > Mandatory Data Fields"
.
2. Use the check box(es) to define whether it is mandatory to enter a sample
name or content for user-defined data fields for each measurement.
3. Tap <OK> to save the changes.
Related topics
Using the "Sample List" Mode: Chapter 13.3
10.4 Installing User Accounts and Passwords
When delivered, the instrument is freely accessible without password. Three user
accounts are factory preset. The default passwords are set to "user name",
written in lower case letters, e.g. "administrator" is set as the password for the
"administrator" user. For the "administrator" user, the auto logon function is
activated.
10.4.1
User Groups, Auto Logon, Naming Rules and
Password Rules
User groups
There are three user groups which have different levels of user rights:
Naming rules
User names must have at least one character. Allowed are characters from the
ASCII table which are letters, numbers and most special characters.
If you operate the instrument in the increased security mode, user names must
have at least six characters.
Operator
This user group may perform measurements, select a method, edit
the sample list and perform checks.
Manager
This user group has the rights of the operator user group and may
additionally perform adjustments.
Administrator
This user group has the right to access the whole menu.