16 Using Special Functions
C76IB003EN-E
101
To verify a user function
You can directly check the output of your user function when you have finished
the programming.
Tap <Save and Try> at the last step of the "User Function" wizard (Step 4 of 4) to
save the user function and to automatically switch to the calculator (see Chapter
16.3).
To copy a write-protected user function
If you want to change a user function that has been created by another user and
has been write-protected, you can copy the user function and save the changes
in the copy.
1. Tap <Menu> and select
"Setup > Expert Settings > User Function
Management"
to open the user functions list.
2. Highlight the write-protected user function and tap <Edit>.
3. Choose one of the displayed options:
•
Tap <Yes> to make a copy of this user function and save your changes
under a different name.
•
Tap <No> to open this function in read-only mode.
To delete a user function
1. Tap <Menu> and select
"Setup > Expert Settings > User Function
Management"
to open the user functions list.
2. Highlight a list item and tap <Delete>.
16.3 Calculator
With the calculator, you can simulate any factory predefined function or any of
your own user functions. You can enter an input value and check which output
value the function will generate. You can also generate a graph within a defined
range for the selected function.
Examples:
•
You have programmed a user function and want to verify if it works
properly.
•
You want to check the output of the factory predefined function "Ethanol
OIML-ITS-90 % v/v" for some density values of your interest.
To perform a calculation
1. Tap <Menu> and select
"Setup > Expert Settings > Calculator"
to open
the calculator.
