Anritsu MD8470A Скачать руководство пользователя страница 68

Страница: 68 / 114

3.2.2

Operating Windows

Windows XP Professional is installed in the MD8470A. Refer to Win-

dows help functions when something is unclear in Windows operations.

A password of Administrator is set to “xst” at shipment.

A default user is set to “xstuser” at shipment.

Note the following when installing computer anti-virus software in the

MD8470A.

•

The MD8470A checks operations with Symantec Norton AntiVirus.

Setting changes may be required when using other computer anti-virus

software.

•

Setting changes may be required when using computer anti-virus soft-

ware with Firewall functions.

CAUTION

It is recommended to take back-up of data contents

when saving data to the hard disk of the MD8470A.

Anritsu is not responsible for data loss in the hard

disk.

S-drive of the MD8470A is defaulted so as not to be

displayed on your PC by My Computer, etc. Do not

change settings for the S-drive. Changing the S drive

settings may prevent the MD8470A from starting.

3.2.3

Using help functions

Press the

on the keyboard or he

Help

on the front panel while

the application window, where help is to be displayed, is active. Note

that it is not displayed with applications that do not support the Help

functions.

Press the

on the keyboard or the

Help

on the front panel on

the desktop for Windows help.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание MD8470A



















































































































Результаты поиска

Содержание MD8470A

Отзывы:

Anritsu MD8470A, Руководство по эксплуатации, Страница: 68 / 114

Результаты поиска

Содержание MD8470A

Отзывы: