Altigen AltiContact Manager Version 4.6, Руководство администратора

Страница: 386 / 576

17-2 AltiContact Manager Administration Manual
The left side of the IP Phone Configuration window displays all the Alti-IP
phone extensions that have been set up in the system. After creating the IP
extensions, you can set the following parameters:
Parameter Description
Soft Key 1 - 10 Corresponds to the 10 soft keys on the Alti-IP 600. Use the
drop down list to assign one of the following functions to the
desired keys:
• Disabled - when selected, the corresponding soft key
cannot be used.
• BLF (Busy Lamp Field) - when selected, enter an
extension number in the field below; this will be
associated with the corresponding soft key to
automatically dial this extension number ; the button light
next to this soft key indicates that the extension number
is busy. You can select the Play Beep Tone check box to
also have the IP phone play an audible beep when the
extension number is ringing.
Note: The BLF feature can only be assigned to
internal extension numbers, not outside numbers.
• Feature Code - when selected, enter an AltiContact
Manager feature code in the field below; this will be
associated with the corresponding soft key to dial this
feature code.
• Speed Dial - when selected, enter the speed dial code in
the field below; this will be associated with the
corresponding soft key to dial this speed dial code.
• Phone Setting - when selected, the IP phone user will be
able to program the corresponding soft key, as a speed
dial or feature code key, directly from the IP phone (using
* * 6, then ENTER).
Note: The lower left soft key is set up as FLASH by default.
This key can be re-assigned in ACM Admin, using
the AltiGen IP Phone Configuration window. No
other soft keys can be configured to FLASH.