Altigen AltiContact Manager Version 4.6, Руководство администратора

Страница: 170 / 576

CT-Bus Clock Configuration
5-26 AltiContact Manager Administration Manual
• Domestic. The dialing plan for your country or region. For example,
type in a 1 for 1-plus dialing within the U.S. dialing plan (also known
as the North American Numbering Plan).
• International. The prefix used for international calls. For example,
this is 011 for international calls made in the USA.
• Other. Flexible and variable uses, such as a string of digits to be
considered non-local.
Setting Emergency Numbers
In the event that a person dialing a number in an emergency (911, for
example) forgets to press the trunk access code to dial out, entering the
number in the Emergency Number field will have the system
automatically find the trunk access code to seize the call. You may enter up
to three (3) emergency numbers in the appropriate fields.
Note: When using this option, make sure your system’s trunk access code
is available.
Setting the TDM Bus Mode
The TDM (Time Division Multiplexed) bus allows for routing data to be
carried at a steady rate. Depending on your T1/E1 trunk configuration, the
system will automatically select one of the following companding schemes
to optimize your system’s TDM bus mode:
• A-law - typical standard used in Europe
• u-law - typical standard used in the U.S. and Japan.
CT-Bus Clock Configuration
The CT bus is a bit-serial, byte-oriented, synchronous TDM bus that uses a
bit clock for bit registration and a common frame sync pulse for frame
alignment. This ensures signal quality between the system’s CT bus and the
boards’ signal processing resources.
Through the CT-Bus Clock Configuration window, you can set the CT
Bus clock.