Altigen AltiContact Manager Version 4.6, Руководство администратора

Страница: 130 / 576

AltiContact Manager Uninstall
3-48 AltiContact Manager Administration Manual
4. Label and disconnect the DB-25 to 50 pin Telco cable(s) from the
board I/O connectors.
5. Remove the telephony board(s) from the original system.
6. Install the board(s) into the new system.
7. Install the system key to the parallel or USB port.
8. Install the AltiContact Manager software as described, beginning with
“Preparing to Install AltiContact Manager” on page 3-2.
9. Restore the AltiContact Manager system database as follows:
a. Run AltiAdmin and select Services System Data
Management to run the data management utility.
b. Click the Restore icon to open a dialog that allows you to choose
files to restore.
c. Make sure all the Component check boxes are selected.
d. In the Restore From drop-down list, select the drive and directory
to which you backed up the files in Step 1.
e. Click OK to start the restore.
f. Once the restore is complete, click the Exit icon to exit the data
manager.
g. Shut down and exit the system by selecting Shutdown Switching
from the Services menu.
10. Reboot the system, then run the MVIP test.
11. Reboot the system.
AltiContact Manager Uninstall
To back out the upgrade, be sure to stop all AltiContact Manager-related
services before uninstallation. To do this, run AltiAdmin, log in, and select
Shutdown Switching from the Services menu.
In the event that the auxiliary services were not stopped, stop them one at
a time using the Start
Programs Administrative Tools
Services applet.
Then launch the Uninstall program by clicking the Uninstall AltiContact
Manager icon in the AltiContact Manager program folder. (Do not use the
Add/Remove program in Windows to remove AltiContact Manager; this
will not completely delete all necessary folders.)