Catalogue Numbers
A: Factory mounted
B: Field kit or Spare
Katalognummer
A: Fabikmontage
B: Vorortmantage oder Ersatzteil
Numeri di catalogo
A: Montato in fabbrica
B: Kit o ricambio
------------------------------------------------------------------------------------------------------
A
-------------
B
----------------
Kit for 1-4 RONIS locks
| RONIS-Bausatz
| Kit per 1-4 serrature RONIS
GBRON
GBRONR
Kit for 1-4 PROFALUX locks | PROFALUX-Bausatz
| Kit per 1-4 serrature PROFALUX
GBPRO
GBPROR
Kit for Kirk Key Interlock Kit | KIRK-Bausatz
| Kit per serratura Kirk
GBKRKR
Kit for 1 CASTELL
| CASTELL-Bausatz
| Kit per 1 serratura CASTELL
GBCAS
GBCASR
RONIS Lock
| Ronis-Schloss
| Serratura RONIS
GRON
PROFALUX Lock
| PROFALUX-Schloss
| Serratura PROFALUX
GPRO
CASTELL Lock
| CASTELL-Schloss
| Serratura CASTELL
GCAS
LOCKS
BREAKER ME10
INTRO
BREAKER
ACCESSORIES
TESTS
APPENDIX
TRIP UNIT
4.4-02
Fig.1
Fig.2
C
B
A
Removal of Front cover
1
. Remove pad locks, installed if any.
2.
Unscrew the 6 [Env. T = 4] screws (6Nm, 4.42ft-lbs) using a Pozidrive screw driver
as shown in Fig. A&B.
3.
Rotate the charging handle down and slide the front
cover over the handle to remove out as shown in Fig. C.
Abbau der Frontabdeckung
1
. Entfernen Sie installierte Vorhängeschlösser.
2.
Lösen Sie die 6 [Baugr. T = 4] Schrauben (6Nm) mit einem Pozidrive-
Schraubenzieher wie in Abb. A&B dargestellt.
3.
Ziehen Sie den Spannhebel nach
unten, während Sie die Abdeckung für den Abbau nach oben über den Hebel heben,
wie in Abb. C.
Rimozione della copertura anteriore
1.
Se installati, rimuovere I lucchetti.
2.
Svitare le 6 [Taglia T = 4] viti (6Nm, 4.42ft-lbs) utilizzando un cacciavite Pozidriv
come mostrato in Fig.A&B.
3.
Abbassare la leva di carica manuale e far scorrere
la copertura anteriore sopra la maniglia per rimuoverla, come mostrato in Fig. C.
Envelope 1-3 only | nur bei Baugröße 1-3 | solo per Taglia 1-3
Lock types:
Ronis 1104B:
Standard key 1/4 inch clockwise
rotation to trap the key.
Profalux B204DY:
With key type S1 1/4 inch
clockwise rotation to trap the key.
Castell type FS1 lock
with key type FK4 key, 45°
with clockwise rotation to trap the key, 7/8
"x3/8" square spindle.
Devices are available in two variants:
1. Factory mounted mechanism:
The breaker/device is supplied off works with all
cam's and screws allowing the user to mount a
separately acquired AEG type lock kit or the use
of a lock of the correct type purchased
elsewhere.
2. Field mountable device:
A kit is supplied allowing the field mounting of
the locking mechanism and allowing the use of
a lock of the correct type purchased elsewhere.
Typen von Schlüsselsperren:
Ronis 1104B:
Standardschlüssel 1/4 Zoll
Uhrzeigersinn Schließdrehung.
Profalux B204DY:
Mit Schlüssel S1 1/4 Zoll
Uhrzeigersinn Schließdrehung.
Castell FS1 Schloss
mit Schlüssel Typ FK4, 45°
Drehung im Uhrzeigersinn zur Schließung, 7/8
"x3/8" Quadratspindel.
Die Geräte gibt es in zwei Varianten:
1. ab Werk vormontiert
:
Der Schalter wird ab Werk mit allen
Vorrichtungen, Hebeln und Schrauben geliefert,
die es dem Benutzer ermöglichen separat
erworbene AEG oder frei verkäufliche
zugehörige Sperren anzubauen.
2. Vorort-montierbar:
Ein gelieferter Bausatz, der die Vorortmontage
der Sperrmechanik und die Verwendung einer
anderweitig erworbenen Sperre ermöglicht.
ME10 Envelope 1, 2 & 3 | Baugröße 1, 2 & 3 | Taglia 1, 2 & 3
Catalogue Numbers
A: Factory mounted
B: Field kit or Spare
Katalognummer
A: Fabikmontage
B: Vorortmantage oder Ersatzteil
Numeri di catalogo
A: Montato in fabbrica
B: Kit o ricambio
----------------------------------------------------------------------------------------------------------
A
--------------
B
----------------
Kit for 1 RONIS locks
| RONIS-Bausatz
| Kit per 1-4 serrature RONIS
GTBRON
GTBRONR
Kit for 1 PROFALUX locks
| PROFALUX-Bausatz
| Kit per 1-4 serrature PROFALUX
GTBPRO
GTBPROR
RONIS Lock
| Ronis-Schloss
| Serratura
RONIS
GRON
PROFALUX Lock
| PROFALUX-Schloss
| Serratura
PROFALUX
GPRO
ME10 Envelope T | Baugröße T | Taglia T
Tipologie:
Ronis
1104B: Chiave standard 1/4 di pollice,
rotazione in senso orario per impedire
l'estrazione.
Profalux
B204DY: Con chiave S1 1/4 di pollice,
rotazione in senso orario per impedire
l'estrazione.
Castell
FS1 con chiave tipo FK4, rotazione in
senso orario 45° per impedire l'estrazione, perno
quadrato 7/8 "x3/8".
I dispositivi sono disponibili in due varianti:
1. Meccanismo montato in fabbrica:
L'interruttore/dispositivo è fornito con tutte le
camme e le viti che consentono all'utente di
montare un kit di bloccaggio AEG acquistato
separatamente o l'uso di un blocco chiave del
tipo corretto comprato altrove.
2. Dispositivo da montare in loco:
Kit per il montaggio in loco del meccanismo di
bloccaggio e per permettere l'utilizzo di una
serratura di tipo corretto acquistata altrove.