Page
51
of
125
4.5.2.4 Anybus/Modbus TCP/Ethernet IP Outputs
Press to enter Output Configuration Screen (below)
Element Type:
Choose from Byte, Int16 or Int32.
Element:
Shows Element # being
configured.
Bit:
Enter Bit #
Polarity:
Select Normally Open or
Normally Closed Outputs.
Mode:
Normal - Output signal sent.
Timed signal sent (Time entered in
seconds)
Flash - signal sent (Time entered in
Seconds)
Select desired
Output Function(s) from list above
Click on
after appropriate changes are made.
Below is
an example of the Anybus Output screen with five Outputs set up
.
Click on
to make changes on an individual Element or
return to the Output Configuration screen.
Will delete element.
NOTE:
See 13.0 Assignable I/O for more detail on Output
Functions.
