Page
112
of
125
Normal,
Timed,
Flash
√
√
√
√
√
√
The “External Controlled” output assignment will reflect the state of an input. Use the “Input Bus, “Input
Element”, and “Input Bit” to specify the input to reflect.
Tool In CCW
Supported Feature
Bus Element Bit
0-32
Polarity
N.O.,
N.C.
Mode
Normal,
Timed,
Flash
Time Width Offset Input
Bus
Input
Element
Input
Bit
√
√
√
√
√
The “Tool In CCW” output assignment will be active if the tool is put into disassembly mode and inactive
if the tool is in assembly mode.
Tool In CW
Supported Feature
Bus Element Bit
0-32
Polarity
N.O.,
N.C.
Mode
Normal,
Timed,
Flash
Time Width Offset Input
Bus
Input
Element
Input
Bit
√
√
√
√
√
The “Tool In CW” output assignment will be active when the is in assembly mode and inactive if the tool
is put into disassembly mode.
Torque
Supported Feature
Bus Element Bit
0-32
Polarity
N.O.,
N.C.
Mode
Normal,
Timed,
Flash
Time Width Offset Input
Bus
Input
Element
Input
Bit
√
√
√
√
The “Torque” output assignment will output the final torque value of the most recent rundown. The
value will be cleared to 0 at the start of a new fastening cycle or a Job reset. At the end of the
fastening cycle the final torque will be truncated to an integer and output.
Torque (x10)
Supported Feature
Bus Element Bit
0-32
Polarity
N.O.,
N.C.
Mode
Normal,
Timed,
Flash
Time Width Offset Input
Bus
Input
Element
Input
Bit
√
√
√
√
The “Torque (x10)” output assignment will output the final torque value of the most recent rundown. The
value will be cleared to 0 at the start of a new fastening cycle or a Job reset. At the end of the
fastening cycle the final torque will be multiplied by 10, truncated to an integer and output.
Torque (x100)
Supported Feature
