Page
59
of
125
4.5.5 Power Up
•
Allows user several “Job” choices upon controller Power
Up:
•
Power Up Job Number:
Controller will power up on the job
# selected. When “Last job” is selected, controller will
power up on last job selected prior to being Powered
Down.
Last Job:
Controller will default to last job performed.
•
Power Up Job Action
•
Reset Job:
Job will be reset when controller is Powered Up.
•
Wait for job Reset:
Controller will wait for an External Job
reset command upon Power Up and will retain job ormation
existing prior to power down.
4.5.6 Bar Code Setup
•
Required Identifiers for Tool Enable:
Selects which
four Identifiers (ID#1-4) are required to enable tool.
•
Reset identifiers for Job Complete:
Selects which
four Identifiers (ID#1-4) to reset on a job complete.
Select Identifiers by clicking on them.
Step 1
:
Click anywhere in body to enter the Barcode ID
configuration Screen or add additional Identifiers.
