Page
23
of
125
4.2.3 Advanced Options
PSet Name:
Add PSet name if desired (up to 10 characters).
Thread Direction:
Defines fastening direction (default is right
hand).
Re-hit/Reject Parameters:
P
revents the fastening of an
already tightened fastener. If enabled, tool will stop and the
rundown will be aborted, if the angle of rotation between the
Re-Hit Reference Torque and the In-Cycle Torque is less than
the Re-Hit Angle Count.
NOTE:
If the attempted rundown is a Re-Hit, it will not be
reported or recorded.
Re-hit Reject Enable:
Enables the feature.
Re-Hit Reference Torque:
This torque value is the start of the
angle count that determines a Re-Hit. (This value should be
lower than the In Cycle Torque specified in the PSet.)
Re-Hit Angle Count:
If the angle count between the Re-Hit
Reference Torque
and the In Cycle Torque is less than this
value, the rundown is determined to be a Re-Hit.
4.2.4 Manage PSets
Save PSets to Browser
Allows the PSet information to be saved to the local PC
connected to controller. PSet information is saved as
a .txt file and can be opened using any text editor such
as WordPad. It can also be opened with Excel. The
format of the .txt file is tab separated values.
Export PSets to Browser
Save the PSets as a database file to the PC connected
to controller. These PSets can later be imported to
another controller.
Import PSets from Browser
Import previously exported PSets to controller.
Delete PSets
Enables deletion of selected PSets.
Save/Export/Import USB
Same as above using a USB Memory Stick
