Page
37
of
125
4.2.7 Multiple Stage Rundown Examples
EXAMPLE:
Two-stage rundown with downshift
This example shows a typical two stage rundown with a higher first stage free speed and slower
down shift speed to minimize overshooting of the target torque.
EXAMPLE:
Three stage rundown with unfasten on the last stage. (Rundown Back-off)
This example shows a typical three stage rundown with a back-off stage at the end of the
rundown.
NOTE:
The unfasten stage’s audit parameter is set to false, therefore, the torque and angle
reported are from the fastening portion of the rundown.
