AcraDyne Gen IV, Руководство оператора

Страница: 56 / 125

Page 56 of 125

P: Torque Pass/Fail
•
‘P’ = Pass, ‘F’ = Fail

HHHHH: Torque High Limit
•
Units selected in the PSet X10

LLLLL: Torque Low Limit
•
Units selected in the PSet X10

TTTTT: Torque Result
• Units selected in the PSet X10

P : Angle Pass/Fail
•
‘P’ = Pass, ‘F’ = Fail

HHHHH : Angle High Limit
•
Degrees

LLLLL : Angle Low Limit
•
Degrees

AAAAA : Angle Result
•
Degrees

NAC%: Message End

CR: Carriage return control character

LF: Line feed control character

NULL*: Null control character (*if option is selected)
•
UEC Serial Format (matches UEC 4800 and Gen3):
o # 1 P BB TTT.T AAAA PPPP 0000 J CR NULL*

#: Message Start

1: Spindle Number (Always 1)

P: PSet
•
PSet(‘1’ – ‘9’) for PSets 1-9, (‘A’ – ‘Z’) for PSets 10-35

BB: Job Bolt Count
•
Total number of accepts during the Job

TTT.T: Torque Result
•
Units selected in the PSet

AAAA : Angle Result
• Degrees

PPPP: Pulse Count

0000

J: Judgment
•
‘@’ = Overall Pass, ‘H’ = Low Torque, ‘I’ = High Torque, ‘J’ = Low
Angle, ‘K = High Angle, ‘G’ = Fault During Fastening

CR: Carriage return control character

NULL*: Null control character (*if option is selected)