Accom APR Attache, Руководство пользователя

Страница: 164 / 164

Accom APR
yy$WWDFKp Digital Disk Recorder
150 User Guide
❏
F4 Program Delay
This softkey function is used to define the amount of delay during PGM Delay record
operations. This value is used only if the PGM Delay record mode is selected with
softkey
. When the Program Delay value is set to 00.00, the Program Delay
recordings will immediately playback the video, key and audio just recorded.
By typing a timecode value into the numeric keypad and then pressing the
softkey, you change the Program Delay value. This value defines an amount of time
that must expire before playback of video will begin after a recording was started.
Specifying a timecode value for Program Delay will cause the video output from
Attaché to show “black” (with audio muted) for the duration of the Program Delay.
Once the program delay has expired, the Attaché will then begin playing the video off
the disk

even while the recording is still underway.
For example, assuming a Program Delay value of
2.00.00
with PGM Delay active,
a new recording starting at
15.00
seconds on the disk will begin recording at
15.00
, but the video output will remain black during the first
2.00.00
minutes of
record time (the value of the Program Delay). While the recording is underway,
when timecode
2.15.00
is reached, the video output from Attaché will switch from
Black to off-disk playback

with the playback starting at the same point at which
the recording started. Refer to Figure 2.31 below for an illustration of this example.