Accom APR Attache, Руководство пользователя

Страница: 89 / 164

Hardware Control Panel Familiarization - Ch.2
User Guide 75
Â
Output Only
Places the 54mV setup on the output CAV only.
Â
In & Out
Places the 54mV setup on both the input and output
CAV. Default in the 525 line standard.
❏
F2 Pic-Sync Out
Press
(
Pic-Sync Out
) after typing a value into the numeric keypad to
adjust the picture-to-sync relationship of the Analog and Digital Video outputs of
the Attaché. The adjustment increment is in microseconds, with the following
maximum range of values:
-3.704
µ
s to +3.704
µ
s
127(
Only qualified engineering personnel should adjust this parameter.
❏
F3 Horizontal Timing
Press
(
Horiz Timing
) after typing a value into the numeric keypad to
adjust the horizontal position of the component analog, composite analog, and
digital video outputs. This adjustment moves the entire picture/sync packet of the
video outputs with respect to the chosen system reference. The adjustment range
is from 192 pixels (14.2uS) advanced down to 64 pixels (4.74uS) late, with 0.5
pixel (37ns) resolution. The right-hand column displays the current value for the
parameter. Change the timing value in 0.5 pixel increments by pressing and
holding down the
(
Horiz Timing
) softkey while turning the rotary knob
on the Attaché control panel.
127(
Only qualified engineering personnel should adjust this parameter.
❏
F4 Vertical Timing
Press
(
Vert Timing
)
after typing a value into the numeric keypad to
adjust the vertical position of the component analog, composite analog, and digital
video outputs. This adjustment moves the entire picture/sync packet of the video
outputs with respect to the chosen system reference. The adjustment range is from
0 down to -40 lines. The default setting is 0 lines. The right-hand column