ZyXEL Communications P-2802H-I Series User Manual Download Page 79

Page: 79 / 418

Chapter 5 Status Screens

P-2802H(W)(L)-I Series User’s Guide

5.5 VoIP Statistics

Click

Status > VoIP Statistics

to access this screen.

Figure 36

VoIP Statistics

Each field is described in the following table.

Interface

This field displays either

Ethernet

(LAN ports) or

Wireless

(WLAN port).

Status

For the LAN ports, this field displays

Down

(line is down) or

(line is up or

connected).
For the WLAN port, it displays the transmission rate when WLAN is enabled or

N/A

when WLAN is disabled.

TxPkts

This field displays the number of packets transmitted on this interface.

RxPkts

This field displays the number of packets received on this interface.

Collisions

This is the number of collisions on this interfaces.

Poll Interval(s)

Type the time interval for the browser to refresh system statistics.

Set Interval

Click this to apply the new poll interval you entered in the

Poll Interval

field

above.

Stop

Click this button to halt the refreshing of the system statistics.

Table 18

Packet Statistics (continued)

LABEL

DESCRIPTION

Table 19

VoIP Statistics

LABEL

DESCRIPTION

SIP Status

Account

This column displays each SIP account in the ZyXEL Device.

Summary of Contents for P-2802H-I Series



































































































































































































































































































































































































































Search results

Summary of Contents for P-2802H-I Series

Reviews:

Brands by name

Popular brands

ZyXEL Communications P-2802H-I Series, User Manual

Search results

Summary of Contents for P-2802H-I Series

Reviews:

Brands by name

Popular brands