ZyXEL Communications P-2802H-I Series, User Manual

Page: 264 / 418

Chapter 19 Remote Management Configuration
P-2802H(W)(L)-I Series User’s Guide
264
Figure 156 Remote Management: Telnet
The following table describes the labels in this screen.
19.7 Configuring FTP
You can use FTP (File Transfer Protocol) to upload and download the ZyXEL Device’s
firmware and configuration files, please see the User’s Guide chapter on firmware and
configuration file maintenance
for details. To use this feature, your computer must have an
FTP client.
To change your ZyXEL Device’s FTP settings, click
Advanced > Remote MGMT > FTP .
The screen appears as shown. Use this screen to specify which interfaces allow FTP access
and from which IP address the access can come.
Table 106 Remote Management: Telnet
LABEL DESCRIPTION
Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Access Status Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client
IP
A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select
All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to begin configuring this screen afresh.