ZyXEL Communications P-2802H-I Series, User Manual

Page: 258 / 418

Chapter 19 Remote Management Configuration
P-2802H(W)(L)-I Series User’s Guide
258
19.3 WWW
Use this screen to configure the ZyXEL Device’s HTTP and HTTPS management settings.
Click
Advanced > Remote MGMT to display the WWW screen.
Figure 148 Remote Management: WWW
The following table describes the labels in this screen.
Table 105 Remote Management: WWW
LABEL DESCRIPTION
WWW
Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Access Status Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select
All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
HTTPS
Server Host Key Select the Server Host Key that the ZyXEL Device will use to identify itself. The
ZyXEL Device is the SSL server and must always authenticate itself to the SSL
client (the computer which requests the HTTPS connection with the ZyXEL
Device).
Authenticate
Client Certificates
Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself to the ZyXEL Device by sending the ZyXEL Device a certificate.
To do that the SSL client must have a CA-signed certificate from a CA that has
been imported as a trusted CA on the ZyXEL Device (see Appendix K on page 791
on importing certificates for details).