manualshive.com logo in svg

ZyXEL Communications P-2802H-I Series, User Manual

Share
Download
ZyXEL Communications P-2802H-I Series User Manual Download Page 294

Chapter 22 Logs

P-2802H(W)(L)-I Series User’s Guide

294

22.5  Log Descriptions

This section provides descriptions of example log messages. 

Table 118   

System Maintenance Logs

LOG MESSAGE

DESCRIPTION

Time calibration is 
successful

The router has adjusted its time based on information from 

the time server.

Time calibration failed

The router failed to get information from the time server.

WAN interface gets IP: %s

A WAN interface got a new IP address from the DHCP, 

PPPoE, PPTP or dial-up server.

DHCP client IP expired

A DHCP client's IP address has expired.

DHCP server assigns %s

The DHCP server assigned an IP address to a client.

Successful WEB login

Someone has logged on to the router's web configurator 

interface.

WEB login failed

Someone has failed to log on to the router's web configurator 

interface.

Successful TELNET login

Someone has logged on to the router via telnet.

TELNET login failed

Someone has failed to log on to the router via telnet.

Successful FTP login

Someone has logged on to the router via ftp.

FTP login failed

Someone has failed to log on to the router via ftp.

NAT Session Table is Full!

The maximum number of NAT session table entries has been 

exceeded and the table is full.

Starting Connectivity 
Monitor

Starting Connectivity Monitor.

Time initialized by Daytime 
Server

The router got the time and date from the Daytime server.

Time initialized by Time 
server

The router got the time and date from the time server.

Time initialized by NTP 
server

The router got the time and date from the NTP server.

Connect to Daytime server 
fail

The router was not able to connect to the Daytime server.

Connect to Time server fail

The router was not able to connect to the Time server.

Connect to NTP server fail

The router was not able to connect to the NTP server.

Too large ICMP packet has 
been dropped

The router dropped an ICMP packet that was too large.

Configuration Change: PC = 
0x%x, Task ID = 0x%x

The router is saving configuration changes.

Successful SSH login

Someone has logged on to the router’s SSH server.

SSH login failed

Someone has failed to log on to the router’s SSH server.

Successful HTTPS login

Someone has logged on to the router's web configurator 

interface using HTTPS protocol.

HTTPS login failed

Someone has failed to log on to the router's web configurator 

interface using HTTPS protocol.

Summary of Contents for P-2802H-I Series



































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands