ZyXEL Communications P-2802H-I Series, User Manual

Page: 243 / 418

Chapter 17 Quality of Service (QoS)
P-2802H(W)(L)-I Series User’s Guide
243
Click Advanced > QoS > Class Setup to open the following screen.
Figure 137 QoS: Class Setup
The following table describes the labels in this screen.
17.3.1 Class Configuration
Click the Add button or the Edit icon in the Modify field to configure a classifier.
Table 101 Bandwidth Management: Rule Setup
LABEL DESCRIPTION
Create a new Class Click Add to create a new classifier.
No This field displays the index number of the classifier.
Active Select the check box to enable this classifier.
Name This is the name of the classifier.
Interface This shows the interface from which traffic of this classifier should come.
Priority This is the priority assigned to traffic of this classifier.
Filter Content This shows criteria specified in this classifier.
Modify Click the Edit icon to go to the screen where you can edit the classifier.
Click the Remove icon to delete an existing classifier.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.