ZyXEL Communications P-2802H-I Series, User Manual

Page: 267 / 418

Chapter 19 Remote Management Configuration
P-2802H(W)(L)-I Series User’s Guide
267
19.8.2 SNMP Traps
The ZyXEL Device will send traps to the SNMP manager when any one of the following
events occurs:
19.8.3 Configuring SNMP
To change your ZyXEL Device’s SNMP settings, click Advanced > Remote MGMT >
SNMP . The screen appears as shown.
Figure 159 Remote Management: SNMP
Table 108 SNMP Traps
TRAP # TRAP NAME DESCRIPTION
0 coldStart (defined in RFC-1215 ) A trap is sent after booting (power on).
1 warmStart (defined in RFC-1215 ) A trap is sent after booting (software reboot).
4 authenticationFailure (defined in
RFC-1215 )
A trap is sent to the manager when receiving any
SNMP get or set requirements with the wrong
community (password).
6 whyReboot (defined in ZYXEL-
MIB)
A trap is sent with the reason of restart before
rebooting when the system is going to restart (warm
start).
6a For intentional reboot: A trap is sent with the message "System reboot by
user!" if reboot is done intentionally, (for example,
download new files, CI command "sys reboot", etc.).
6b For fatal error: A trap is sent with the message of the fatal code if the
system reboots because of fatal errors.