ZyXEL Communications NetAtlas User Manual Download Page 76

Page: 76 / 340

Chapter 5 View

NetAtlas EPON Manager User’s Guide

To view the port status of a device choose a device and a slot with a module
inserted from the list located on the left-hand side of the screen.

Figure 45

View > PON Status > Port Status

The following table describes the labels in this screen.

Table 31

View > PON Status > Port Status

LABEL

DESCRIPTION

Device Name

This field displays the name and IP address of each device that you may
use in this screen. Select the appropriate device.

Search
Device...

Click the Search Device... button to find or locate a device (or node).
See

Section 3.9.3.1 on page 56

for more details.

Slots (A on the
figure)

This field displays the slots of the selected device. This list is only
available when a device is selected.

Refresh

Click this to update the screen.

Ethernet Port

This section is applicable only when you select Mgmt. in the slot list.

Enet. Port

This field displays each Ethernet port on the selected device.

Oper Status This field displays whether the port is connected (Up) or disconnected

(Down).

Speed

(Mbps)

This field displays the speed (either 10 for 10Mbps, 100 for 100Mbps or
1000 for 1000Mbps).

Link Type

This field displays whether a device is connected to the Gigabit Ethernet
port (gigabitEthernet_100_1000) or not (-).

Summary of Contents for NetAtlas





















































































































































































































































































































































Search results

Summary of Contents for NetAtlas

Reviews:

Related manuals for NetAtlas

Brands by name

Popular brands

ZyXEL Communications NetAtlas, User Manual

Search results

Summary of Contents for NetAtlas

Reviews:

Related manuals for NetAtlas

Brands by name

Popular brands