manualshive.com logo in svg

ZyXEL Communications NetAtlas, User Manual

Share
Download
ZyXEL Communications NetAtlas User Manual Download Page 302

Chapter 20 Advanced Configuration

NetAtlas EPON Manager User’s Guide

302

20.5.1  Configuring a System Static MAC Address Entry

To add a new rule, click New... under System Setting in the Static MAC 
Forward screen. To change the settings of a rule, select a rule and click Modify... 
under System Setting in the Static MAC Forward screen.

Figure 188   

Advanced Configuration > Static MAC Forward > New System Static 

MAC Forward 

Delete

Select the rule(s) that you want to remove in the MAC Forwarding table 
and then click the Delete button.

Copy to...

Click the Copy to.. button to copy the configuration from the device that 
you are currently configuring to other device(s) of the same model. 

Port Setting

Use this section to set the OLT to forward packets with the specified MAC 
address to the selected ONU.

Port List

Select a PON port that you want to configure in this screen.

Index

This field displays the index number of the rule. 

Active

This field displays whether this static MAC address forwarding rule is active 
(v) or not (x). You may temporarily deactivate a rule without deleting it. 

Name

This field displays the descriptive name for this rule.

ONU Name 

This field displays the name of the ONU to which this rule is applied. 

Logical Link 
Index 

This field displays the index number of the logical link on the ONU.

MAC Address This field displays the MAC address of the packets that will be forwarded. 
New...

Click the New... button to create a MAC forwarding rule.

Modify...

Click the Modify... button to edit the selected rule.

Delete

Select the rule(s) that you want to remove in the MAC Forwarding table 
and then click the Delete button.

Copy to...

Click the Copy to.. button to copy the configuration from the device that 
you are currently configuring to the port(s) on the same device or the 
port(s) on other device(s) of the same model. 

Close

Click Close to exit this screen.

Table 152   

Advanced Configuration > Static MAC Forward (continued)

LABEL

DESCRIPTION

Summary of Contents for NetAtlas





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands