ZyXEL Communications NetAtlas User Manual Download Page 151

Page: 151 / 340

NetAtlas EPON Manager User’s Guide

151

H A P T E R

1 2

OLT Configuration Overview

The following chapters cover how to configure the OLTs using the EMS
configuration screens.

Note: For a basic introduction on how to use the interface of the OLT configuration

screens see

Section 3.9 on page 54

12.1 OLT Configuration Screens Overview

• Use the

System Configuration

screens (

page 153

) to configure settings such as

general system information, SNMP, remote management and time setup.

• Use the

Switch Configuration

screens (

page 169

) configure switch settings such

as priority queuing, STP, link aggregation and GARP timer and port-related

settings (such as port VLAN, STP and security).

• Use the

Multicast Configuration

screens (

page 199

) to configure multicast

settings and MVR (Multicast VLAN Registration) groups.

• Use the

IP Configuration

screens (

page 217

) to configure the system IP address,

DHCP relay, TrTCM and static routing.

• Use the

RMON Configuration

screens (

page 229

) to configure RMON (Remote

Network Monitor) settings on a device.

• Use the

EPON Configuration

screens (

page 239

) to configure the OLT PON

settings and apply EPON profiles to an ONU.

• Use the

EPON Profile Configuration

screens (

page 249

) to configure EPON

profiles.

• Use the

Advanced Configuration

screens (

page 291

) to configure advanced

settings, such as MAC filtering, IEEE 802.1x, loop guard and bandwidth control.

Summary of Contents for NetAtlas





















































































































































































































































































































































Search results

Summary of Contents for NetAtlas

Reviews:

Brands by name

Popular brands

ZyXEL Communications NetAtlas, User Manual

Search results

Summary of Contents for NetAtlas

Reviews:

Brands by name

Popular brands