ZyXEL Communications NetAtlas User Manual Download Page 74

Page: 74 / 340

Chapter 5 View

NetAtlas EPON Manager User’s Guide

Figure 44

View > Spanning Tree Protocol Status: MSTP

The following table describes the labels in this screen.

Table 30

View > Spanning Tree Protocol Status:MSTP

LABEL

DESCRIPTION

Device List

This field displays the name and IP address of each device that you may
access in this screen. Select the appropriate device.

Search
Device...

Click the Search Device... button to find or locate a device (or node).
See

Section 3.9.3.1 on page 56

for more details.

Refresh

Click this to update the screen.

Spanning Tree
Protocol

This field displays the STP mode on this device.

CST

This section describes the Common Spanning Tree settings.

Bridge ID

This is the unique identifier for this bridge, consisting of bridge priority
plus MAC address.

Hello Time
(sec)

This is the time interval (in seconds) at which the root switch transmits
a configuration message.

Port ID

This is the priority and number of the port on the device through which
this device must communicate with the root of the Spanning Tree.

Forward Delay
(sec)

This is the time (in seconds) the root switch will wait before changing
states (that is, listening to learning to forwarding).

Revision
Number

This field displays the revision number for this MST region.

Path Cost

This is the path cost from the root port on this device to the root switch.

Configuration
Name

This field displays the configuration name for this MST region.

Summary of Contents for NetAtlas





















































































































































































































































































































































Search results

Summary of Contents for NetAtlas

Reviews:

Related manuals for NetAtlas

Brands by name

Popular brands

ZyXEL Communications NetAtlas, User Manual

Search results

Summary of Contents for NetAtlas

Reviews:

Related manuals for NetAtlas

Brands by name

Popular brands