ZyXEL Communications NetAtlas, User Manual

Page: 277 / 340

Chapter 19 EPON Profile Configuration
NetAtlas EPON Manager User’s Guide
277
Action Specify the actions the ONU takes on the packets that match the
corresponding filtering criteria. Options include Set Path, Add VLAN
Tag, Delete VLAN Tag, Set VID and Add VLAN Tag, Set CoS,
Replace Tag, Replace Tag and Set VID, Clear Add Tag, Clear Del
Tag, Clear Del Tag and Add Tag, Copy Field To CoS, Copy Field To
VID, Discard, Forward, Set Path and Forward, Add Tag and
Forward, Delete Tag and Forward, Set VID and Add Tag and
Forward, Set CoS and Forward, Replace Tag and Forward, Replace
Tag and Set VID and Forward, Clear Add Tag then Forward, Clear
Delete Tag then Forward, Clear Delete Tag and Add Tag then
Forward, Copy field to CoS and Forward and Copy field to VID and
Forward.
The Add VLAN Tag or Add Tag action is to add a VLAN tag to the
matched packets.
The Replace Tag action is to change the VLAN tag in the matched
packets.
The Copy field to CoS or Copy field to VID action is to change the CoS
value or the VLAN ID in the matched packets.
The Forward action is to send the matched packets.
Note: If an incoming packet matches a profile with the action(s)
described above only but does not match a profile with the
corresponding
Set action (described below), the OLT will not
perform any actions on the packet.
The Set Path action is to forward traffic through the specified link.
The Set VID action is to add or replace with the VLAN tag you specified in
the next fields.
The Set Cos action is to replace the CoS value in the matched packets
with what you specified in the CoS field.
The Delete VLAN Tag or Delete Tag action is to remove the existing
VLAN tag from the matched packets.
The Clear xxx action is to not perform the xxx action defined in other
matched profiles with a lower precedence.
The Discard action is to drop the matched packets.
Port/Link
Index Select the index number of the logical link for upstream traffic or the
Gigabyte Ethernet port (1 by default) on the ONU’s PON module for
downstream traffic.
CoS This field is available only when you select Set CoS in the Action field.
Select a CoS value the OLT adds to the matched packets.
VID This field is available only when you select Set VID in the Action field.
Enter a VLAN ID number the OLT adds to the matched packets.
OK Click this to save the settings and close the screen.
Cancel Click this to discard all changes and close the screen.
Table 138 EPON Profile Configuration > Add ONU Policy Rule Profile (continued)
LABEL DESCRIPTION