manualshive.com logo in svg

ZyXEL Communications NetAtlas, User Manual

Share
Download
ZyXEL Communications NetAtlas User Manual Download Page 141

 Chapter 10 Maintenance

NetAtlas EPON Manager User’s Guide

141

The following table describes the labels in this screen.

10.7.2  Adding a Device to Scheduled Configuration Restore

Use this screen to add one or more devices to a schedule for restoring 
configuration files. To open this screen, Click Maintenance > Scheduled Device 
Configuration Restore > New... > New....

Figure 94   

Maintenance > Scheduled Device Configuration Restore: Add devices 

Table 66   

Maintenance > Scheduled Device Configuration Restore: New Schedule

LABEL 

DESCRIPTION

Device Name

This field displays the name and the IP address of the device that will 
have it’s configuration restored.

Source File

This field displays the configuration file you wish to restore.

New...

Click this to add one or more devices to a schedule for restoring 
configuration.

Delete

Select one or more devices, and click this to remove them.

Time

Specify the date the device configuration should be restored. This is 
based on the current date of the computer on which the EMS is running, 
not the current date of the device(s). Enter the month and date (mm:dd) 
and time (hh:mm 24 hour format). 

FTP timeout

Type the number of seconds to wait for a successful FTP connection 
before timing out.

OK

Click OK to save your changes and exit the screen.

Cancel

Click Cancel to exit without making any changes.

Summary of Contents for NetAtlas





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands