ZyXEL Communications NetAtlas, User Manual

Page: 62 / 340

Chapter 4 Map
NetAtlas EPON Manager User’s Guide
62
4.1.1 Adding a Submap or Device
To add a new submap or a new device, make sure you select the Root Subnet or a
submap icon in the Device List Panel. Click Map > Add Submap/Device Node to
display the following screen.
Figure 35 Map > Add Submap/Device Node
The following table describes the labels in this screen.
Table 23 Map > Add Submap/Device Node
LABEL DESCRIPTION
Node Type These options are not applicable when you edit the properties of an
existing submap or device.
Select the Submap or Device radio button to add a new submap or
device icon to the Device List Panel.
If you select Submap, only the Node Name and Descriptions fields
are displayed.
Node Name Enter a descriptive name (up to 31 characters) for identification
purposes.
Descriptions Enter a description (up to 31 characters) about the node.
IP Address This field is not applicable when you select Submap.
Enter the IP address of the device.
System User
Name Enter the administrator account user name to log into the device.
System
Password Enter the administrative password (up to 31 characters) you use to log in
to the device. This password is used by the EMS administrator for device
firmware upload.
Get
Community Enter the get community, which is the password for the incoming Get-
and GetNext- requests from the management station.
Set
Community Enter the set community, which is the password for incoming Set-
requests from the management station.