ZyXEL Communications NetAtlas, User Manual

Page: 281 / 340

Chapter 19 EPON Profile Configuration
NetAtlas EPON Manager User’s Guide
281
The following table describes the labels in this screen.
Table 141 EPON Profile Configuration > Add Policy Link Rule Profile
LABEL DESCRIPTION
Active Select this check box to enable the profile.
Clear this check box to disable the profile.
Name Enter a descriptive name (up to 20 alphanumerical characters) to identify
this profile.
Precedence Select an ordering number between 0 and 7 for this profile. If a packet
matches more than one profile and the specified actions conflict with each
other, the OLT applies only the profile with the highest precedence. 0 is
the highest precedence level and 7 is the lowest.
Rule
Index
This is the index number of the rule. A packet should match all the rules
in this section before the OLT performs the actions you specified below.
Active This field displays whether the rule is enabled.
Field This field displays the packet filtering criteria.
Left Mask This field displays the mask used to define how many bit(s) from the left
will turn to zero and not be used for comparison when the specified value
is right-aligned.
Right Mask This field displays the mask used to define how many bit(s) from the right
will turn to zero and not be used for comparison when the specified value
is right-aligned.
Operator This field displays the operator that applies to the incoming packets.
Value This field displays the value the incoming packets should match.
Set... Click Set... to edit a filtering rule.
Action
Index
This is the index number of the rule.
Active This field displays whether the rule is enabled.
Action This field displays the actions the OLT takes on the packets that match the
corresponding filtering criteria.
VLAN Layer This field displays whether the OLT is to set the outer VLAN tag (Service
VLAN) or inner VLAN tag (Customer VLAN).
This field is applicable only when the Action is Add VLAN Tag, Delete
VLAN Tag, Clear Add VLAN or Clear Delete VLAN.
TPID This field displays the Tag Protocol Identifier (TPID), a four-digit
hexadecimal number from 0000 to FFFF that the OLT adds to the matched
packets.
This field is applicable only when the Action is Add VLAN Tag.
CoS This field displays the CoS value the OLT adds to the matched packets.
This field is applicable only when the Action is Add VLAN Tag.
VID This field displays the VLAN ID number the OLT adds to the matched
packets.
This field is applicable only when the Action is Add VLAN Tag.
Set... Click Set... to edit an action rule.