ZyXEL Communications NetAtlas User Manual Download Page 210

Page: 210 / 340

Chapter 15 Multicast Configuration

NetAtlas EPON Manager User’s Guide

210

In the End Address field, enter the ending IP multicast address of the multicast
group in dotted decimal notation.

Enter the same IP address as the Start Address field if you want to configure
only one IP address for a multicast group.

Click OK to save the settings and close this screen. Otherwise, click Cancel to
discard the settings and close this screen.

A screen displays showing the configuration result. Click Close to exit the screen.

15.5 EPON Multicast VLAN

Click Configuration > Multicast Configuration > EPON Multicast VLAN to
display the screen as shown.

Figure 136

Multicast Configuration > EPON Multicast VLAN

The following table describes the labels in this screen.

Table 104

Multicast Configuration > EPON Multicast VLAN

LABEL

DESCRIPTION

Multicast VLAN This table displays the settings the multicast VLAN settings.

Index

This field displays the multicast VLAN ID.

Active

This field displays whether the multicast group is enabled or not.

Summary of Contents for NetAtlas





















































































































































































































































































































































Search results

Summary of Contents for NetAtlas

Reviews:

Related manuals for NetAtlas

Brands by name

Popular brands

ZyXEL Communications NetAtlas, User Manual

Search results

Summary of Contents for NetAtlas

Reviews:

Related manuals for NetAtlas

Brands by name

Popular brands