manualshive.com logo in svg

ZyXEL Communications NetAtlas, User Manual

Share
Download
ZyXEL Communications NetAtlas User Manual Download Page 130

Chapter 10 Maintenance

NetAtlas EPON Manager User’s Guide

130

10.2  Load Default Configuration

Use this screen to load the factory default settings onto the devices.

Figure 85   

Maintenance > Load Default Configuration

The following table describes the labels in this screen.

10.2.1  Loading the Factory Default Settings

Follow the steps below to reset a device configuration to the factory defaults.

Table 58   

Maintenance > Load Default Configuration

LABEL

DESCRIPTION

Device Name

Select the devices that you wish to return to factory default settings. 
Hold down the Ctrl. key to select more than one device at a time.

Search 
Device...

Click the Search Device... button to find or locate a device (or node). 
See 

Section 3.9.3.1 on page 56

 for more details.

Keep current IP 
address

Enable this feature to keep the device’s IP address the same even after 
the default configuration has been uploaded.

Load factory 
default

Select this option to load the factory default settings for the selected 
device(s) when Apply is clicked.

Choose 
configuration 
file

Select this option to load a configuration file of your choice onto the 
device(s). Click Browse... to select the configuration file or type the 
location of the file into the text box.

Apply

Click Apply to reset the selected devices to the factory defaults or to 
the chosen configuration file.

Close

Click Close to exit the screen.

Summary of Contents for NetAtlas





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands