manualshive.com logo in svg

ZyXEL Communications NetAtlas, User Manual

Share
Download
ZyXEL Communications NetAtlas User Manual Download Page 214

Chapter 15 Multicast Configuration

NetAtlas EPON Manager User’s Guide

214

Click Configuration > Multicast Configuration > IGMP Snooping VLAN to 
display the screen as shown. Then, select the device that you want to configure.

Figure 140   

Multicast Configuration > IGMP Snooping VLAN 

The following table describes the labels in this screen. 

Table 105   

Multicast Configuration > IGMP Snooping VLAN

LABEL

DESCRIPTION

Mode Select 

Auto to have the switch learn multicast group membership 

information of any VLANs automatically.

Select Fixed to have the switch only learn multicast group membership 
information of the VLAN(s) that you specify below.

In either Auto or Fixed mode, the switch can learn up to 16 multicast 
groups (including up to three VLANs you configured in the MVR screen). For 
example, if you have configured one multicast VLAN in the MVR screen, 
you can only specify up to 15 VLANs in this screen.

The switch drops any IGMP control messages which do not belong to these 
16 VLANs.

Note: You must also enable IGMP snooping in the 

Switch Setup

 

screen first. 

Apply

Click Apply to save the settings in this part of the screen. 

Index

This field displays the index number of an entry. 

VID

This field displays the ID number of the VLAN group. 

Name

This field displays the descriptive name for this VLAN group. 

Summary of Contents for NetAtlas





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands