manualshive.com logo in svg

ZyXEL Communications NetAtlas, User Manual

Share
Download
ZyXEL Communications NetAtlas User Manual Download Page 41

 Chapter 2 Main Screen

NetAtlas EPON Manager User’s Guide

41

The following table describes the labels in this screen.

Table 15   

Help > Register

LABEL

DESCRIPTION

License Key

Enter the license key on a card that came in the box.
myZyXEL.com

 

is ZyXEL’s online services center where you can register 

your EMS. 

Note: You need to create an account before you can register your 

device and activate the services at myZyXEL.com.

New 
myZyXEL.co
m account

If you haven’t created an account at myZyXEL.com, select this option and 
configure the following fields to create an account and register your EMS.

Existed 
myZyXEL.co
m account

If you already have an account at myZyXEL.com, select this option and 
enter your user name and password in the fields below to register your 
EMS.
Enter a user name for your myZyXEL.com account.

User Name

Enter a user name for your myZyXEL.com account. The user name should 
be from six to 20 alphanumeric characters, and the underscore is allowed. 
Spaces are not allowed.

Password

Enter a password for your myZyXEL.com account. The password should 
be from six to 20 alphanumeric characters, and the underscore is allowed. 
Spaces are not allowed.

Re-type 
Password

Enter the password again for confirmation.

E-Mail 
Address

Enter your e-mail address. You can use up to 80 alphanumeric characters 
(periods and the underscore are also allowed) without spaces.

Country

Select your country from the drop-down list box.

Submit

Click Submit to register your NetAtlas EPON EMS and activate the 
standard service.

Cancel

Click Cancel to close this screen without saving your changes

Summary of Contents for NetAtlas





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands